BC-40 User Manual V1.2
43
8.7 Parameters Export and Import
The purpose of parameters export and import: For example, there are many machines on the client side,
and the combination of counterfeit gear is set on the first machine. If you want to use this combination on
the second machine, you can use SD card to export the parameters of the main control program on the first
machine, and then import it on the second machine.
8.7.1 Parameters Export
1
）
Start the machine and enter the main interface.
2
）
The customer adjusts the counterfeit gear of each function of the first machine according to the demand.
3
）
Insert the SD card into the SD card slot on the back of the machine. It must be in place, as shown in
Figure 93 below.
Figure 93
4
）
Press the
key to enter the main interface of USER MENU in Figure 86. Press the
key again for two consecutive times to enter the interface shown in Figure 94:
Figure 94
5
）
Click "
" to enter the interface of parameters management, as shown in
Figure 95 below:
Содержание BC-40
Страница 1: ......
