VSSELECT101
·
•
•--------------
-----------
--
•
•
NO. 1.2.51.32.11826-000
User's Manual
Vl.0.1
Statement
• Please refer to the actual product for more details; the manual is just for reference.
• The manual will be regularly upgraded according to the product update; the upgraded
content will be added in the manual without prior announcement.
• Please contact the customer service for the latest procedure and supplementary
documentation.
• The company is not liable for any loss caused by the operation which is not followed
by the manual.
• Please refer to the company's final explanation if there is any doubt or dispute.
General Introduction
The VSSE
L
ECT
101
is used to connect HDCVI camera and realize free switch of multiple
video modes. The features are shown as follows:
• Support free switch of multiple video modes such as CVI, AHO, TVI and CVBS.
• Support OSD control and motorized vari-focal function control in CVBS mode.
• Support wakening via one key, low power consumption during ready mode.
• Easy and convenient operation.
Attention:
• Please place the dry cell correctly according to the direction of positive and negative pole.
• Please use two brand new AAA alkaline dry cells.
• Please remove the dry cells from the remote control if it is not used for a long time, which is
to avoid liquid leakage and damaging the remote control.
• Please do not mix the old and new batteries or the batteries with different models.
• Please put the replaced batteries into the designated recycle bin.
Step 1
Drag and take down the battery cover of the controller.
Step
2
According to the "+/- "shown inside the dry battery bunker, install two brand new AAA
alkaline dry cells (Not Provided)
Step3
Put the battery cover back in location. So far, the battery installation has been completed.
