Page 1 of 2
Slide the Dowel Nut into the Dowel Nut Housing with
the thread facing up through the hole. Place the Dowel
Nut Housing into the slot of the track and slide along to
desired position.
1
Slot at Rear of track
Layout
Tools & Materials Required.
5mm Security Allen key, provided in kit.
Phillips Head screw driver.
Measuring tape.
Care Instruction:
Clean vehicle roof and gutter prior to fitting Rhino Tracks.
3
1
2
4
5
6
7
8
9
10
11
13
14
12
Parts List
Item
Component Name
Qty
Part No.
1
FRONT Buffer Strip 1060mm
1
R011
2
REAR Buffer Strip 1045mm
1
R011
3
FRONT Cross Bar 1060mm
1
A155
4
REAR Cross Bar 1045mm
1
A155
5
M6 x 35mm Security Screw
4
B092
6
M6 Spring Washer
4
W004
7
M6 x 12.5mm Flat Washer
4
W003
8
RSP Sportz Leg
4
M094
9
RSP Top Pad
4
M173
10
RSP Bottom Pad
4
M172
11
M6 x 16 Dowel Nut
4
N027
12
Dowel Nut Housing
4
A
341
13
10G x 1/2” Pan Head Phillips Screw
4
B045
14
5mm Security Allen Key
1
SecKey-S
15
Fitting Instruction
1
RS-294
Maximum carrying capacity: 75kg
RSPT508 Range Rover Sport 2 Bar Sportz System
Place these instructions in the vehicle’s glove box after installation is complete.
Important:
Please read these instructions carefully prior to installation.
Please refer to your fitting instruction to ensure that the roof racks are installed in the
correct locations.
Check the contents of kit before commencing fitment and report any discrepancies
