Important Note:
Sideways mount position is not recommended for Pioneer Tray and Pioneer Tradie if it has four or less planks as it may cause inteference.
Recommendations:
Clean product prior to fitting the Pioneer Recovery Tracks Bracket.
The recommended maximum number of recovery tracks fitted on a set of bracket is four.
Note for Dealers and Fitters:
It is your responsibility to ensure instructions are given to the end user or client.
Rhino-Rack
3 Pike Street, Rydalmere,
NSW 2116, Australia.
Document No: R1203
(Ph) (02) 9638 4744
Prepared By: Peter Luu
Issue No: 03
(Fax) (02) 9638 4822
Authorised By: Chris Murty
Issue Date: 29/11/17
These instructions remain the property of RhinoRack Australia Pty. Ltd. and may not be used or changed for any other purpose than intended.
7
5
5
8
Pioneer Recovery Track Flat Bracket (43235)
Important:
Please read these instructions carefully prior to installation.
Please refer to your fitting instruction to ensure that the bracket is installed in the correct locations.
Check the contents of kit before commencing fitment and report any discrepancies.
Place these instructions in the vehicle’s glove box after installation is complete.
Page 1 of 2
Item
Component Name
Qty.
Part No.
1
Recovery Bracket
2
CA1823
2
M10 x 100mm Hex Bolt
4
B259
3
M10 Spring Washer
4
W061
4
M10 Hex Nut
4
N075
5
M6 x 16 Socket Head Screw
4
B031
6
M6 Spring Washer
4
W004
7
M6 x 12.5mm Flat Washer
4
W003
8
M6 Channel Nut
4
N002
9
M10 Turn Knob
4
M874
10
Torque Security Key
1
TOR-
KEY-SXB
11
Instructions
1
R1203
Parts List
7
2
1
4
9
3
5
8
10
5
Tools required: 16mm spanner.
Instructions
1
2
Assemble the pin hardware as shown. Tighten in
place. Torque 10-13Nm.
Assemble the M6 hardware as shown. Finger tighten
only at this stage.
2
1
4
3
Any hole can be used to achieve minor adjustments in bracket
positions.
