http://www.rhinomc.com
Page 5
BLDC Motor Drive 50W [RMCS-3002]
RHINO MOTION CONTROLS
RMCS-3002
Brushless DC motor Driver 50W
(Max. 30VDC and 3A per phase)
Chapter 2: Drive Overview:
RMCS-3002 is Rhino Motion Controls introductory Brushless low voltage (10–30V) DC driver
designed for smooth and quiet operation without compromising on torque and control at
higher speeds. It has short-circuit protection for the motor outputs, over-voltage and under-
voltage protection and will survive accidental motor disconnects while powered-up.
Driver Acceptance:
Upon receiving the driver, please check the following aspects:
•
Make sure the driver model is consistent with that ordered.
•
Unpack the driver and make sure it is free from damage and no part is missing.
•
Make sure that all sets of screws in the driver are securely tightened.
Key Features:
•
Smooth and quiet operation at all speeds and extremely low motor heating
•
DC Input supply voltage rated at 10V to 30V
•
Rated current : 1.6A
•
Peak current : 5A
•
Short-circuit protection for the motor outputs, over-voltage and under-voltage
protection