http://www.rhinomc.com
Page 10
BLDC Motor Drive 50W [RMCS-3002]
RHINO MOTION CONTROLS
RMCS-3002
Brushless DC motor Driver 50W
(Max. 30VDC and 3A per phase)
Service and Support
Service and support for this product are available from the Rhino Motion Controls Web site (
http://www.rhinomc.com
) and
our customer service email:
,
Six-Month Warranty
Rhino Motion Controls (rhinomc.com) warrants its products against defects in materials and workmanship for a period of 6
months from shipment delivery. During the warranty period, Rhino Motion Controls will either, at its option, repair or
replace products which proved to be defective.
Exclusions
The above warranty does not extend to any product damaged by reasons of improper or inadequate handlings by
customer, improper or inadequate customer wirings, unauthorized modification or misuse, or operation beyond the
electrical specifications of the product and/or operation beyond environmental specifications for the product.
Obtaining Warranty Service
To obtain warranty service, please contact our customer service department at [email protected] before returning
product for service. Please make sure that you have gone through this entire installation manual and datasheet before
deciding that your product is liable for replacement or repair under this 6-month warranty Customer shall prepay shipping
charges for products returned to Rhino Motion Controls for warranty service, and Rhino Motion Controls shall pay for
return of products to customer.
Warranty Limitations
Rhino Motion Controls makes no other warranty, either expressed or implied, with respect to the product. Rhino Motion
Controls specifically disclaims the implied warranties of merchantability and fitness for a particular purpose. Some
jurisdictions do not allow limitations on how long and implied warranty lasts, so the above limitation or exclusion ma y not
apply to you. However, any implied warranty of merchantability or fitness is limited to the 6-month duration of this written
warranty.
Disclaimer
Copyright © Rhino Motion Controls, 2017
Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or
reproduced in any material or electronic form without the prior written consent of the copyright holder.
This product and its documentation are supplied on an as-is basis and no warranty as to their suitability for any particular
purpose is either made or implied.
This document provides preliminary information that may be subject to change without notice.