Rheem NPT 200, Руководство по установке

Страница: 4 / 32

4
COMPONENTS AND KIT CONTENTS
SOLAR COLLECTOR KITS
– SCREWED FITTINGS
For installation with a solar storage tank with a drain back heat exchanger.
The solar water heater is designed for the solar collectors to be roof mounted and
the solar storage tank to be installed at ground or floor level. The collector kit is
suitable for:
Collector Kit
– Screwed Fittings (2 solar collectors)
12105000 NPT200 solar collectors
Part No
Kit Components and Description
12105000
two collectors
347547 Installation instructions roof kit 2NPT drain back 1
331846 Collector rail (1650 mm long) 2
330847 Collector straps 4
331928 Collector clamps 8
330350 H
ex screw set S/S 5/16” x 3/4”
8
330354
Washer S/S 5/16”
8
330806
Nut S/S 5/16”
8
345096 Silicone rubber washer 31 x 22.5 x 2.0 mm 8
330695 Collector connector assembly L M33 2
063603 Connector M33 - NPT 2
331656
Olive ½” copper
2
331655 Compression
nut ½”
2
330600 Gland nut L collector M33 M 1
330606 Blanking disc copper 1
340441 Hot sensor housing
– temperature well M33
1
346080 Hot sensor assembly drain back 1
123204 Label hot pipe / cold pipe 1
348071 Cable ties 150 mm long 10