Rheem NPT 200, Руководство по установке

Страница: 28 / 32

28
INSTALLATION – SOLAR COLLECTORS
Note: Although the drawing illustrates the solar cold pipe connecting the
bottom left hand corner of the solar collectors, the solar cold pipe may be
connected to either the bottom right or the bottom left hand corner of the solar
collectors. The solar hot pipe must connect to the top of the solar collectors
diagonally opposite to the solar cold pipe connection.
INSTALLATION TWO COLLECTORS WITH SCREWED FITTING
Solar Drain Back System
Two NPT 200 Collector Installation (Exploded View) Solar Collectors.
SUPPLIED IN ROOF KIT-2 COLLECTORS (12105000)
SUPPLIED IN TWO COLLECTOR KIT (SCREWED FITTINGS) (12105000)
1. Collector rail
2. Collector strap
3. Collector union
4. Sensor housing
5. End plug
6. Washer
7. Blanking disc
9. Hot sensor lead assembly
10. Connector
11. Compression nut
12. Compression olive
13. Clamp, hex screw, washer, nut
14. Cable tie
15. Label
– solar hot pipe
16. Label
– solar cold pipe
(Supplied separately)
17. Solar collector