Threaded
r
od
4 pcs.
Curved
w
asher
4 pcs.
Lock
w
asher
8 pcs.
Wrench
1 pc.
Hex
n
ut
4 pcs.
3
Flat
w
asher
4
Allen
w
rench
NO.
ITEM
DESCRIPTION
QTY.
Allen
b
olt
4 pcs.
2
1
1 pc.
4 pcs.
1.
Place Base #1 (B) upright on a
non-abrasive
flat surface.
2.
Secure the threaded rod (1) to the fixed nut in the
b
ase by simply turning it
manually. Refer to FIGURE 1.
3.
Raise
one section of
Base #2 (C) and place the rod (1) to align with the
holes on the end
of the base
(C). P
osition
the section of
Base #2 (C)
against Base #1
(B)
so the threaded rods (1) go through the holes. Insert
the
curved washer (2)
and
lock washer (3) and place hex nuts (4) on
threaded rod (1)
as illustrated in FIGURE 2.
Ti
ghten the hex nuts (4) with
the
wrench (5)
.
4.
Repeat the above procedure with the other
section of
Base #2 (C) to
attach it to
Base #1 (B).
WARNING
•
Use product on carpet or apply optional felt pads to help protect floors.
•
Do not pull or push product
across
the floor.
Felt
p
ad
4 pcs.
5
HARDWARE INCLUDED
6
7
8
9
C
A
B
C
FIGURE 1
FIGURE 2
ASSEMBLY INSTRUCTIONS
PARTS INCLUDED
A [1] TOP
B [1] BASE #1
C [2] BASE #2
Page 1 of 2
10/1/18
HESTON ROUND DINING TABLE INSTRUCTIONS
