background image

Made in Vietnam

Distributed in the U.S.A by:                                                                                               
Restoration Hardware Baby & Child

11640 Harrel St. Suite B 
Mira Loma, CA 91752 

www.rhbabyandchild.com

Distributed in Canada by:
Restoration Hardware Canada, Inc. 

1500-1055 West Georgia Street 
Vancouver, British Columbia V6E4N7 

All Restoration Hardware cribs are designed to meet the highest safety

standards and comply with all U.S. and Canadian cribs and cradles regulations.

Model No: F0035 - 7

DRAKE PANEL TODDLER KIT

        WARNING: 

Read all 

Instructions before assembling 
this product.

 

KEEP INSTRUCTIONS FOR 
FUTURE USE.

Page 1 of 6

CUSTOMER SERVICE

If you are missing parts or have any questions about this product, contact us first. You can also order parts by writing to 

the address above. Include the product model number, color, and a brief description of the part. Call 1-800-762-1751.

CARE AND CLEANING

DO NOT 

scratch or chip the finish. 

DO NOT

 use abrasive chemicals for cleaning. If the crib is to be stored, store in a cool 

dry place and carefully package all original hardware to protect from loss.

TOOLS AND INSTALLATION

Tools Necessary: Allen Key (included).

NOTE

: It may be easier to assemble product with two people.

NOTE:

 When inserting bolts, turn clockwise until tight. Then loosen 1/2-3/4 of a turn. After crib is completely assembled, 

return to each bolt and tighten.

Содержание F0035-7







Отзывы: