ASSEMBLY INSTRUCTIONS:
STEP 1:
Attach the Right Storage Base (C) and
Left Side Rail (D) to the Headboard (A)
with Short Bolt (2), Spring Washer (3),
Flat Washer (4), and tighten by using
Allen Key (4).
STEP 2:
- Remove the drawer from Right Storage
Base (C)
completely,
and set it aside.
- Position the Footboard (B) between
the Right Storage Base (C) and Left Side
Rail (D) and align the holes.
Note:
- The drawer is equipped with rubber
stopper that prevent the drawer from
being removed during normal operation.
- During assembly, the drawer can be
removed with minor force as the rubber
stoppers will bend to allow the drawer
to be removed
completely.
- When removing the drawer, it MUST
be removed at a straight angle. If it is
crooked, the drawer will stick on the
wooden runners.
TOOLS NEEDED:
Phillips Head Screwdriver (not included)
PARTS INCLUDED:
A [1]
B [1]
C [1]
D [1]
E [3]
F [2]
HEADBOARD PANEL
FOOTBOAR PANEL
RIGHT STORAGE BASE
LEFT SIDE RAIL
STRETCHER BARS
PLATFORM PANELS
2
3
4
5
Bolt 5/16” x 1-3/4”
4 pcs.
8 pcs.
8 pcs.
1 pc.
Flat Washer 5/16”
6
24 pcs.
Screw 8 x 30mm
Spring Washer 5/16”
Allen Key 4mm
NO.
ITEM
DESCRIPTION
QTY.
1
Bolt 5/16” x 2”
4 pcs.
D
4x
C
A
C
D
2
5
B
4
3
Page 1 of 3
C A L L U M R I G H T S T O R A G E B E D T W I N I N S T R U C T I O N S
