WARNING
:
ADULT ASSEMBLY ONLY OWING TO THE PRESENCE OF SMALL
PARTS, SHARP POINTS AND EDGES
Customer Service - If you are missing parts or have any questions about this product, please
contact us at : 1-800-762-1751
PART LIST
A. [1] BELLINA DRESSER
B. [4] LEG
INSTRUCTIONS:
STEP #1:
Gently lay Bellina Dresser on its back on a flat and non-abrasive surface.
Note:
On the bottom of the dresser are holes with pre-installed nuts that correspond to the
threaded rods pre-installed in the legs.
STEP #2:
Align and insert the threaded rod of the leg into the hole and turn clockwise to tighten.
Please see sketch below.
Note: do not over tighten.
STEP #3:
After assembly, gently lift the dresser into upright position.
B EL LI NA DRESSER
