Page 6 of 7
E
STEP #3
MATTRESS SUPPORT HEIGHT ADJUSTMENT
NOTE: If mattress supports is not in the lowest position.
STEP #3.1
Loosen and remove all hardware (BB) on both sides of the frame of
mattress support.
STEP #3.2
Re-install the bolt on the third hole of the frame through the hole on the
arm support. Fasten the bolt with plain washers, lock washers &
hexagonal nut. Repeat procedure on the other arms of the mattress
support. See DETAIL D & DETAIL E.
DETAIL E
MATTRESS
SUPPORT
STABILIZER RAIL
LOCK
WASHER
HEX NUT
PLAIN
WASHER
ALLEN BOLT
(BB)
ALLEN
WRENCH
DETAIL D
HARDWARE
(BB) 1/4" X 1-1/4" BOLT = 8 PCS
PLAIN WASHER = 8 PCS
LOCK WASHER = 8 PCS
HEX NUT = 8 PCS
ALLEN WRENCH = 1 PC
11 X 70
OPEN WRENCH = 1 PC
ALLEN BOLT
(BB)
ALLEN BOLT
(BB)
ALLEN BOLT
(BB)
