PARTS INCLUDED
A [1] HEADBOARD
B [2] SIDE RAILS
C [1] FOOTBOARD
D [13] BED SLATS
NO.
ITEM
DESCRIPTION
QTY.
1
2
3
4
5
Threaded Rod
8 pcs.
Curved Washer
8 pcs.
Lock Washer
8 pcs.
Wrench
1 pc.
Hex Nut
8 pcs.
FIGURE 1
ASSEMBLY INSTRUCTIONS:
1. Place the headboard (A) upright in the position you wish the bed to be in when fully assembled.
2. Secure the threaded rod (1) to the fixed nut in the headboard (A), footboard (C) simply turning it manually clockwise direction.
3. Raise the side rail (B) up and place the rod (1) to align with the bore holes on the end of the side rail (B). Put the side rail (B) up against the headboard
(A) so the threaded rods (1) go through the bore holes. Insert curved washer (2), lock washer (3) and place hex nuts (4) on threaded rod (1) then
tighten the hex nuts (4) with wrench (5), as illustrated in FIGURE 1.
4. Repeat the above procedure with the other side rail (B) to attach it to the headboard (A), and then repeat to connect side rails (B) to the footboard (C).
2
3
4
1
5
Round Head
Screw
26 pcs.
6
A
B
C
Fig. 1
Page 1 of 2
