RH Baby&child ALEXANDRA TUFTED CRIB Скачать руководство пользователя страница 4

IMPORTANT SAFETY INFORMATION FOR TODDLER & DAY BEDS

 

WARNING: ENTRAPMENT / STRANGULATION

       HAZARD

Infants have died in toddler beds from entrapment and strangulation.
Failure to follow these warnings and the assembly instructions could result in

serious injury or death.

NEVER use bed with children under 15 months.
NEVER place bed near windows where cords from blinds or drapes may

strangle a child.

●The mattress intended for use on the bed shall be a full-size crib mattress having
minimum dimensions of 51-5/8 inches (1310mm) in length, 27-1/4 inches (690mm) in

width and 4 inches (100 mm) in thickness, not exceeding 6 inches (152 mm) in
thickness.

●If guardrails are used as the mattress containment means, guardrail(s) provided must
be used to avoid the formation of a gap between the mattress and the bed that could

cause an entrapment.

●DO NOT place bed near windows where cords from blinds or drapes may strangle a

child.

●DO NOT place items with a string, cord, or ribbon around a child’s neck, such as hood

strings or pacifier cords.

●DO NOT suspend strings over a toddler bed for any pacifier cords.
●A child using the toddler or day bed shall be at least 15 months of age and shall not

weigh more than 50lbs (22.7kgs).

Page  4  of 10

Содержание ALEXANDRA TUFTED CRIB











Отзывы: