RGBlink VSP 516S, Руководство пользователя

Страница: 135 / 138

VSP 516S User Manual 135
Installing an Optional SDI Input Board
The VSP 516S can be modified to install or remove optional boards that
change the input and/or output formats that the processor can process. We
will introduce
― Installing an Optional SDI Input Board‖ in the following parts,
specific steps are as follows:
1. Opening the Processor
2. Installing an Optional SDI Input Board
3. Closing the Processor
Part 1: Open the Processor
Specific steps are as follows:
1. Disconnect the AC power cord from the VSP 516S to remove power from
the unit.
Warning: To prevent electric shock, always unplug the VSP 516S from the
AC power source before opening the enclosure.
2. Disconnect all signal and control cables.
3. Remove the 7 screws on the top cover (Figure 1).
(Figure 1)
4. Remove all the screws on the back panel (Figure 2).