RGB Spectrum MediaWall 2000, Руководство пользователя

Страница: 33 / 71

O P E R A T I O N S
Window Properties
350-8799 MediaWall 2000 User’s Guide 27
. . . . .
•
Click on the colored swatch to the right of the Border Color
drop down selector to access the color chooser window.
•
Select the required color.
•
Click the OK button or cancel if you do not want to change the
color.
. . . . . . . . . .
WINDOW LABELS
A label may be applied to each window independently by using the
Labels and Borders Page of the Windows menu.
•
Click the Properties menu.
•
Select the Window Label and Borders tab (Figure 3-16).
•
If the selected window is not correct, click on the Selected
Window icon and click the desired window number in the
resulting pop-up (see WCP Window Selection , page 17 for
information).
•
Enter the label text into the Label Entry box. The label may be
up to 23 characters in length and may consist of any readable
ASCII characters except for spaces.
•
Click the Label Enabled check box.
The label may be positioned above or below the window. You may also
choose to position in the center or justified to the left or right edge of the
window. To change the position use the following procedure:
•
Click the Properties menu.
•
Select the Window Label and Borders tab (Figure 3-16).
•
If the selected window is not correct, click on the Selected
Window icon and click the desired window number in the
resulting pop-up (see WCP Window Selection , page 17 for
information).
•
Choose the desired position from the Position drop down
selector.