RGB Spectrum MediaWall 2000, Руководство пользователя

Страница: 26 / 71

O P E R A T I O N S
Window Properties
350-8799 MediaWall 2000 User’s Guide 20
. . . . .
Figure 3-9. Input Properties Page – Video Inputs
To select the input source for a window use the following procedure:
•
Click the Properties menu.
•
If the selected window is not correct, click on the Selected
Window icon and click the desired window number in the
resulting pop-up (see WCP Window Selection , page 17 for
information).
•
Choose the required input type by clicking on the associated
radio button in the
Source section.
For information on the Input Timing section of the page please see
Advanced Setup (page 41).
For information on the Picture Adjustment section of the page please
see Advanced Setup (page 41).
SETTING WINDOW
. . . . . . . . . .
SIZE & POSITION
Setting size and position of any window on the wall using the WCP can
be a simple click and drag operation. If more control is required, you
can enter numbers manually too.
To move a window, position the cursor over the window, click and drag
the window to the new position.
To size a window click and grab the edge of the picture and drag to
stretch or shrink the picture. Grab a vertical edge to change the width of
the picture, or grab the horizontal edge to change the height of the
window.
To change the size without affecting the aspect ratio, grab a corner of
the window and move the corner diagonally to resize.
In addition to changing size and position using the WCP Window, the
size and position of windows can be adjusted using the Window Control,
Size and Position page as shown in the following figure.