RFT Code Alert Wander Management, Руководство пользователя

Страница: 11 / 32

General Information
Wander Management Transmitters User Guide Page 9 of 28
0510-1122-J
GENERAL INFORMATION
Introduction
This chapter provides general information
about the transmitters. It includes
information on:

Transmitter types

Warranty dates

Banding the transmitters

Testing and care
Transmitters
The transmitters are lightweight and
compact. They can be worn in the shower
but complete submersion should be
avoided.
SUBMERSION —Prolonged submersion may
result in equipment and/or system failure and
voids any and all Product Warranties.
How do the transmitters work?
Both the Adult and CodeWatch transmitters
send a signal that is received by the Exit
Alarm Receivers (low frequency (LF)
antennas placed on or near a door frame or
in an Exit Alarm Zone) when the transmitter
is within a monitored zone.
The receiver then sends a signal to the
Touchpad Exit Controller which triggers the
alarm process if the door is opened.
Once the situation is addressed, authorized
staff can reset the system using the
Touchpad Exit Controller keypad.