4. Installing the 3200 UK-10
The RFL 3200 UK-10 is primarily designed for installation in a 1U rack, however it can also function
in an office or lab environment un-mounted. Mounting ears (brackets) are provided for installation in
a standard 19 inch rack. Optionally, DIN rail and wall mounting can be accommodated. If the
RFL3200 UK-10 is to be stored for an extended period before being installed, precautions to prevent
corrosion must be taken. This is especially important in humid climates.
After unpacking and inspecting the equipment for any shipping damage it should be securely mounted
in its operating location. The various mounting options are listed below. Note RFL does not supply
mounting hardware apart from the items listed. Other mounting options may be available, contact RFL
at
Application Description
Standard 19” Rack Mounting
Mounting Brackets (2) and 4 screws for mounting
the brackets to the RFL3200 UK-10.
DIN Rail Mounting
Adapter Kit installed under the unit.
Wall Mounting
Mounting Brackets (2) and 4 screws for mounting
the brackets to the RFL3200 UK-10.
Ordering information can be found on
with a complete list of RFL3200 UK-10 options and
their corresponding Smart Numbers.
Standard Rack Mounted Applications
CAUTION
Any installation using an enclosed cabinet with a swing-out rack must be securely fastened to the
floor. This will prevent the cabinet from falling forward when the rack is moved outward.
Space requirements are shown in the following illustration which depicts a typical 19” rack
installation.
RFL3200 UK-10 User Guide
RFL Electronics Inc.
October 6, 2010
6
973.334.3100
