background image

 

 

 
 
 

Table of Contents 

 

1.

  

Overview

 ............................................................................................................................ 1

 

2. Connecting Alarm Relays and Power

 .................................................................................. 2

 

3. Installing the eXmux 3500 Visual Network Management Software (VNMS)

 ........................ 6

 

4. Setting IP Address information through the USB Interface

 .................................................. 9

 

5. Entering the Activation Key Code and Starting VNMS

 ...................................................... 17

 

6. Related Documentation

 ..................................................................................................... 21

 

   
     
 

1.

  

Overview

 

 
Before  the  eXmux  3500M  can  be  configured  into  a  network,  the 

V

isual 

N

etwork 

M

anagement 

S

oftware (VNMS) needs to be installed onto the user’s laptop or PC.  After this is done, IP address and 

other limited settings can be changed through the USB port on the eXmux 3500M. 
 
The  following  instructions  are  designed  to  get  the  user  up  and  running  quickly  after  receiving  their 
eXmux 3500M IP Access Multiplexer. 

These instructions are not to be used as a substitute for the 

RFL Instruction Manual

.  Please refer to the Instruction Manual for detailed installation procedures, 

set-up,  and  Interface  Unit  configuration.    Note,  once  VNMS  is  installed  on  your  computer  the 
Instruction  Manual  can  be  accessed  through  a  short  cut  icon  that  is  automatically  placed  on  your 
desktop.  The Instruction Manual can also be accessed from the “Help” pull-down menu in VNMS. 
 
Note: For set-up and operation of the eXmux 3500M TPS System, follow procedures in the Instruction 
Manual. 
 
This Quick Start Guide will give instructions on: 
 

 

Connecting Alarm Relays and Power. 

 

 

Installing the VNMS software into the user’s laptop or PC. 

 

 

Changing IP address information through the USB port on the eXmux 3500M. 

 

 

Activating the software through a key code and starting VNMS. 

E

X

MUX

®

 

3500M IP Access Multiplexer  

Quick Start Guide for Modular eXmux 

Содержание EXMUX 3500M

























Отзывы: