TX Pole User Manual
Page
20
of
24
–
Version 1
–
Status
–
ISSUED FOR USE
Document Number
–
PRJ-TXP-MAN-002
5
Technical Specifications
5.1
Power Consumption
Table 7
–
Power Consumption vs Mode of Operation
Mode of operation
Average
Consumption [A]
Expected Battery
Life [Hours]
Modem constantly transmitting while connected via
Wi-Fi in AP
0.53
11
Modem constantly receiving MAVLINK stream while
connected via Wi-Fi in AP
0.2
30
Modem not transmitting (just bound) and Wi-Fi in AP
0.19
32
Modem not bound (trying to connect) and Wi-Fi in AP
0.18
33
Modem Disconnected
0.12
50
Powered off
19
μ
-
*The product has an internal battery of 6Ah, 7.4 V. Expected battery life assumes no external charge is applied.
Recommended external power supply:
In order to charge the device, an external power supply of +9V to 16V is needed and must be able to
supply at least 2A. If additionally the device is to be used while charging, the power supply must supply
the nominal current consumption.
For this reason a power supply of +9V to 16V and 3A is
recommended.
5.2
Modem Specification
Table 8- Performance
Supported RF Data Rates
4, 64, 125, 250 and 500 Kbps
Indoor Range
500 m
–
1 km
Line-Of-Sight Range
40km or more depending on antennas
Transmit Power
0 to 30dBm in 1dBm steps
Receiver Sensitivity
>121dBm
Table 9 - Features
Configuration Method
AT Commands, APM Planner, Customized Configuration Tool
Frequency Band
902 MHz
–
928 MHz
Interference Immunity
FHSS (Frequency Hopping Spread Spectrum)
Serial Interface Data Rate
1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200,
230400, 450800, 1000000 baud/s
Table 10 - Networking and Security
Addressing Options
Network ID: 0
–
255
Channels
Up to 50 Frequency Hopping Channels
Supported Network Topologies
Point to point
