background image

END-USER LICENSE AGREEMENT

LICENSE AGREEMENT

End-User License Agreement for RF IDeas™ SOFTWARE and HARDWARE - RF IDeas’ pcProx®,  Proximity Activated Readers, Software 

Developer’s Kit, and Proximity Reader DLLs, and Protocol(s). 

IMPORTANT-READ CAREFULLY: 

This End-User License Agreement (“EULA”) is a legal agreement between you (either an individual or a 

single entity) and the manufacturer RF IDeas (“Manufacturer”) with which you acquired the RF IDeas software and hardware product(s) 

identified above (“PRODUCT”).  The PRODUCT includes the RF IDeas reader, computer software, the associated media, any printed 

materials, and any “on line” or electronic documentation.  By installing, copying or otherwise using the PRODUCT, you agree to be bound by 

the terms of this EULA.  The SOFTWARE PORTION OF THE PRODUCT includes the computer software, the associated media, any printed 

materials, and any “on line” or electronic documentation.  By installing, copying or otherwise using the PRODUCT, you agree to be bound by 

the terms of this EULA.  If you do not agree to the terms of this EULA, RF IDeas is unwilling to license the PRODUCT to you.  In such event, 

you may not use or copy the SOFTWARE PORTION OF THE PRODUCT, and you should promptly contact the vendor you obtained this 

PRODUCT from for instructions on return of the unused product(s) for a refund. 

The products described in this publication are intended for consumer applications. RF IDeas assumes no liability for the performance of 

product. RF IDeas products are not suitable for use in life-support applications, biological hazard applications, nuclear control applications, or 

radioactive areas.  None of these products or components, software or hardware, are intended for applications that provide life support or any 

critical function necessary for the support of protection of life, property or business interests.  The user assumes responsibility for the use of 

any of these products in any such application. RF IDeas shall not be liable for losses due to failure of any of these products, or components of 

these products, beyond the RF IDeas commercial warranty, limited to the original purchase price. 

SOFTWARE PRODUCT LICENSE

  The PRODUCT is protected by copyright laws and international copyright treaties, as well as other 

intellectual property laws and treaties.  The SOFTWARE PORTION OF THE PRODUCT is licensed, not sold. 

1. GRANT OF LICENSE.

  This EULA grants you the following rights:  *Software. You may install and use one copy of the SOFTWARE 

PORTION OF THE PRODUCT on the COMPUTER. *Network Services. If the SOFTWARE PORTION OF THE PRODUCT includes 

functionality that enables the COMPUTER to act as a network server, any number of computers or workstations may access or otherwise 

utilize the basic network services of that server.  The basic network services are more fully described in the printed materials accompanying 

the SOFTWARE PORTION OF THE PRODUCT. *Storage/Network Use. You may also store or install a copy of the computer SOFTWARE 

PORTION OF THE PRODUCT on the COMPUTER to allow your other computers to use the SOFTWARE PORTION OF THE PRODUCT 

over an internal network, and distribute the SOFTWARE PORTION OF THE PRODUCT to your other computers over an internal network.

1.1 General License Grant 

RF IDeas grants to an individual, a personal, nonexclusive license to make and use copies of the SOFTWARE 

PRODUCT for the sole purposes of designing, developing, and testing your software product(s) that are designed to operate in conjunction 

with any RF IDeas designed proximity reader product. You may install copies of the SOFTWARE PRODUCT on an unlimited number of 

computers provided that you are the only individual using the SOFTWARE PRODUCT. If you are an entity, RF IDeas grants the right to 

designate one individual within your organization to have the sole right to use the SOFTWARE PRODUCT in the manner provided above.

1.2 Documentation. 

This EULA grants an individual, a personal, nonexclusive license to make and use an unlimited number of copies of any 

documentation, provided that such copies shall be used only for personal purposes and are not to be republished or distributed (either in hard 

copy or electronic form) beyond the user’s premises and with the following exception: you may use documentation identified in the 

SOFTWARE PRODUCT as the file format specification for RF IDeas’ proximity readers solely in connection with your development of 

software product(s) or an integrated work or product suite whose components include one or more general purpose software products. 

1.3 Storage/Network Use. 

You may also store or install a copy of the SOFTWARE PRODUCT on a storage device, such as a network 

server, used only to install or run the SOFTWARE PRODUCT on computers used by a licensed end user in accordance with Section 1.1.  A 

single license for the SOFTWARE PRODUCT may not be shared or used concurrently by other end users. 

1.4 Sample Code

. RF IDeas grants you the right to use and modify the source code version of those portions of the SOFTWARE 

PRODUCT identified as “Samples in the SOFTWARE PRODUCT (“Sample Code”) for the sole purposes to design, develop, and test your 

software product(s), and to reproduce and distribute the Sample Code, along with any modifications thereof, only in object code form.

2. DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS.

*Limitations on Reverse Engineering, Decompilation and Disassembly.  You may not reverse engineer, decompile, or disassemble the 

PRODUCT, except and only to the extent that such activity is expressly permitted by applicable law notwithstanding this limitation

*You may not reproduce or otherwise emulate, in whole or in part, any form the protocol(s) defined within this PRODUCT for use

without a RF IDeas PRODUCT Redistributable Code. If you are authorized and choose to redistribute Sample Code (“Redistributables”) as 

described in Section 1.4, you agree to: (a) distribute the Redistributables in object code only in conjunction with and as a part of a software 

application product developed by you using the PRODUCT accompanying this EULA that adds significant and primary functionality to the 

SOFTWARE PRODUCT (“Licensed Product”); (b) not use RF IDeas’ name, logo, or trademarks to market the Licensed Product; (c) include a 

valid copyright notice on the Licensed Product; (d) indemnify, hold harmless, and defend RF IDeas from and against any claims or lawsuits, 

including attorney’s fees, that arise or result from the use or distribution of the Licensed Product; (e) otherwise comply with the terms of this 

EULA; and (g) agree that RF IDeas reserves all rights not expressly granted. You also agree not to permit further distribution of the 

Redistributables by your end users except: (1) you may permit further redistribution of the Redistributables by your distributors to your 

end-user customers if your distributors only distribute the Redistributables in conjunction with, and as part of, the Licensed Product and you 

and your distributors comply with all other terms of this EULA; and (2) in the manner described in Section 1.4.

*Separation of Components. The PRODUCT is licensed as a single product.  Its component parts may not be separated for use on more than 

one computer.

*Single COMPUTER. The PRODUCT is licensed with the COMPUTER as a single integrated product.  The PRODUCT may only be used with 

the COMPUTER. 

*Rental. You may not rent or lease the PRODUCT without permission from RF IDeas

*Software Transfer. You may permanently transfer all of your rights under this EULA only as part of a sale or transfer of the COMPUTER,

provided you retain no copies, you transfer all of the PRODUCT (including all component parts, the media and printed materials, any           

upgrades, this EULA and, if applicable, the Certificate(s) of Authenticity), AND the recipient agrees to the terms of this EULA. If the

PRODUCT is an upgrade, any transfer must include all prior versions of the PRODUCT.

*Separation of Components. The PRODUCT is licensed as a single product.  Its component parts may not be separated for use on

more than one computer.

*Termination. Without prejudice to any other rights, RF IDeas may terminate this EULA if you fail to comply with the terms and conditions

of this EULA.  In such event, you must destroy all copies of the SOFTWARE PORTION OF THE PRODUCT and all of its component parts.

64

Содержание pcProx Plus







































































Отзывы: