TROUBLE SHOOTING GUIDE
M-8
ROUGH RIDE
Check the suspension ride height. Be sure the
suspension is operating at the proper height.
If too high, over inflation of the bags will be
evident. Ensure the opposite is not occurring
(no air in air springs) and correct as required.
LOOSE PIVOT CONNECTION
A properly torqued pivot connection is the key
to a long life of a suspension. It is crucial
to ensure sufficient clamp load through the
bushing to prevent premature failure. With Rey-
Align
TM
hangers, ensure all components are
included and that proper installation/torque
procedures are followed.
SHOCKS
Shocks may fail due to over extension. Check
the mounting bolts to be sure no damage to the
mounts has occurred. Shock replacement
must be done with shocks recommended
by Reyco or shock manufacturer. Leaking
(dripping) shocks need to be replaced. Shocks
with a slight mist of oil on them need to be
checked, not necessarily replaced. Ensure that
the correct shock has been installed.
Normal Operation Air Bag
Over-Inflated Air Bag
Worn Mounts
Leaking
Over
Extension
Replace Shock
Normal Shock
