REXROTH Sytronix FcP 5020, Руководство по эксплуатации

Страница: 66 / 204

7.1.2 Functional characteristics
FcP5020 system provides the following features.
● Pressure / flow setting
● Easy command setting (internal commands, and 4 switchable parameters for pres‐
sure command)
● Command setting possibility via analog or communication*
● Unique digital filtering for pressure command rising and dropping
● Preset standby mode (with minimum flow and pressure)
* External hardware for communication is required.
* Supported communication protocols: Profibus, CANopen, SercosIII, Multi-Ethernet,
Modbus.
● Pressure signal feedback
● Compatible with different types of pressure sensors (unlimited scaling for the analog
input signal)
● High resistance capability to electromagnetic interference (with the use of high preci‐
sion digital filter device for signal filtering)
● Quick configuration for Rexroth HM20 pressure sensor
● Quick configuration for Rexroth MOT-FC_HOY motor
● p/Q PID control
● p/Q control with automatic switching between pressure and flow control modes
● Flow control
● Pressure control
● With 2 groups of switchable parameters provided
● Restore ASF parameter
● Extension functions
● Master / slave control
● Sleep / wake function
● Two points / double pump control
● Pressure drop / overshoot compensation
● Pump power limitation
● Hydraulic soft start and separate acceleration ramp
● Protection function
● Pressure sensor failure detection
● Actual pressure monitoring
● Oil change warning / error
● Pressure and flow command limit
● Pump thermal protection
● Sensor monitoring
● CytroPac configuration*
● Sensor monitoring
● LED flash showing converter status
Tab. 7-1: main function
* CytroPac is a specified compact Sytronix system with sensors. It
applies FcP 5020 application software.
Bosch Rexroth AG DOK-SYTROX-FCP5020****-IT01-EN-P 64/201
Frequency-controlled pump drive system Sytronix FcP 5020
Commissioning of Sytronix FcP 5020 System