LED Flash Showing Converter Status
Code
Name
Setting range
Default
Attri.
F2.36
DO1 output
0: No function assigned from ASF
1: Converter warning
2: Green flashing LED
3: Red flashing LED
4: Cooler on
5: Heater on
1
Run
F2.37
EDO output
0
Run
F2.40
Relay 1 output
0
Run
F2.41
Extension relay output
0
Run
Tab. 7-13:
Parameter list of LED flash function
LED flash function can be activated by setting the output parameters (see pa‐
rameter list in chapter 'Digital and Relay Output'). For normal status the light
is always green, for warning condition the light will flash between green and
yellow, and for error condition flash between red and yellow. The flash time of
the yellow light represents the warning / error type. More details refer to the
following figure.
Fig. 7-33:
LED flash function
Bosch Rexroth AG
DOK-SYTROX-DRN5020****-IT05-EN-P
88/143
Frequency-Controlled Pump Drive System Sytronix DRn 5020
Commissioning of Sytronix DRn 5020 System
