Dimension Z is significantly determined by the involved devices. The table
below contains the dimensions Z between the device arranged to the left and
the device arranged to the right.
HCS02 Drive Controllers
Device to the left
Device to the right
Dimension Z
[mm]
HCS02.1E-W0054
HCS02.1E-W0070
HMS01.1N-W0020
HMS01.1N-W0036
HMS01.1N-W0054
HMS02.1N-W0028
HMS02.1N-W0054
HMD01.1N-W0012
HMD01.1N-W0020
HMD01.1N-W0036
HLC01.1D-05M0
HLB01.1D
50
(without a distance
between the devi‐
ces)
Tab.11-5:
Table for Dimension Z
HCS03 Drive Controllers
Device to the left
Device to the right
Dimension Z
[mm]
HCS03.1E-W0070
HCS03.1E-W0100
HCS03.1E-W0150
HMS01.1N-W0020
HMS01.1N-W0036
HMS01.1N-W0054
HMS01.1N-W0070
HMD01.1N-W0012
HMD01.1N-W0020
HMD01.1N-W0036
50
(without a distance
between the devi‐
ces)
HCS03.1E-W0210
HMS01.1N-W0020
HMS01.1N-W0036
HMS01.1N-W0054
HMS01.1N-W0070
HMS01.1N-W0110
HMS01.1N-W0150
HMD01.1N-W0012
HMD01.1N-W0020
HMD01.1N-W0036
75
(without a distance
between the devi‐
ces)
Tab.11-6:
Table for Dimension Z
For the dimensions Z between other combinations see previous
tables.
11.2
Arranging Components From Electrical Point of View
11.2.1
General Information
The section below contains information and recommendations on the ar‐
rangement of the devices in the control cabinet from mainly electrical points
DOK-INDRV*-SYSTEM*****-PR06-EN-P
Rexroth IndraDrive Drive Systems with HMV01/02 HMS01/02, HMD01, HCS02/03
Bosch Rexroth AG
201/309
Arranging the Components in the Control Cabinet
