REXROTH IndraControl VDP 16.3, Руководство по эксплуатации

Страница: 48 / 60

The USB flash drive does not function,
although other USB devices function
●
Set the DIP switch on the VDP to <30 m
USB devices and touch screen do not
work
●
Set the DIP switch adequately to the cable length
Touch screen functionality is not availa-
ble
●
Recalibrate the touch screen
Tab. 13-1: Error causes and error elimination
14 Maintenance
14.1 General Information
Loss of IP degree of protection due to incorrect
maintenance.
NOTICE
The IP degree of protection must be ensured during maintenance!
14.2 Tightening torques
Damage of the mechanics caused by wrong
tightening torque.
NOTICE
If screws were removed because of maintenance works, fasten them again with
the corresponding torque according to the following table.
Threads Mounting torques
M2.5 0.4 Nm
M3 0.7 Nm
M4 1.4 Nm
M5 2.8 Nm
Tab. 14-1: Mounting torques
14.3 Display
14.3.1 General Information
The backlight is subject to wear, see chapter 5.7 "Wear Parts" on page 8 .
A fading backlight causes a progressive deterioration display readability, so that
a replacement is necessary. For further information please contact the Bosch
Rexroth Service.
Bosch Rexroth AG
Maintenance VDP 16.3, VDP 40.3, VDP 60.3
42/53
DOK-SUPPL*-VDP*XX.3***-IT03-EN-P