REXROTH IndraControl VDP 16.3, Руководство по эксплуатации

Страница: 46 / 60

Key at the VDP 16.3, VDP 40.3 Key codes if UpperClassFilter is
activated
Key codes if UpperClassFilter is
deactivated
L1
to
L8 <CTRL> + <ALT> + <SHIFT
LEFT> + <1 to 8> (not on nu-
meric block)
<F13> to <F20>
R1
to
R8 <CTRL> + <ALT> + <SHIFT
RIGHT> + <1 to 8> (not on nu-
meric block)
<F21> to <F24> and four OEM
special characters
Tab. 12-2: Shortcuts for the keys of the VDP 16.3 and VDP 40.3 devices
If a USB special keyboard is used, the incoming keyboard data
stream is analyzed and if a M-key code is detected (F13-F24 or four
OEM special characters) the corresponding Ctrl-LRShift-Alt-<n> code
is inserted into the data stream.
M-key output via Profibus DP
The M-keys can be output in the PC via an optional PCI plug-in board. The corre-
sponding GSD file is supplied with the application. Pressed M-keys have the val-
ue "1", keys not pressed have the value "0".
Byte 1 Byte 0
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
R8
R7 R6 R5 R4 R3 R2 R1 L8 L7 L6 L5 L4 L3 L2 L1
Tab. 12-3: M-key assignment at the Profibus DP
12.3 Operating and Error Displays
There are four LEDs as on the top of the front panel to display the device condi-
tions and errors of the connected control cabinet PC. Take one of the following
measures if one of the succeeding LEDs displays an error or a note.
Symbol,
LED
Display Meaning Measure
Power
LED green Normal operation
With Y-repeater: This VDP is the
active VDP
-
LED off No supply voltage DC 24 V Check supply voltage
LED is flashing
green
No serial connection to the control
cabinet PC
Check cables
With Y-repeater: This VDP is not
the active VDP
No action
Bosch Rexroth AG
Device Description VDP 16.3, VDP 40.3, VDP 60.3
40/53
DOK-SUPPL*-VDP*XX.3***-IT03-EN-P