12.2 Standard variantsIndraControl VAM 15.1/VAM 21.1
12.2.1 Overview on standard variants
The IndraControl VAM 15.1/VAM 21.1 machine control panels are available in dif-
ferent standard variants:
Keypad with keys and
LED that can be labeled
and programmed freely
Further elements
Ordering numbers and type
codes
IndraControl
VAM 15.1
(Sercos III)
1 keypad with 15 keys
●
E-STOP button
●
Two override rotary
switches for feed and
spindle
●
Six 22.5 mm switching el-
ements, can be labeled
●
One pre-cut-out for 16
mm/22.5 mm elements
below the E-STOP button
●
Four pre-cut-outs for 16
mm/22.5 mm elements,
can be labeled
R911173752
VAM15.1-S3-NF-NN-TB-TA-
VD-NN
IndraControl
VAM 21.1
(Sercos III)
1 keypad with 15 keys
●
E-STOP button
●
Two override rotary
switches for feed and
spindle
●
Six 22.5 mm switching el-
ements, can be labeled
●
One pre-cut-out for 16
mm/22.5 mm elements
below the E-STOP button
R911173753
VAM21.1-S3-NF-NN-TB-TA-
VD-NN
Tab. 12-1: IndraControl VAM 15.1/VAM 21.1 standard variants
12.2.2 Rear side
The devices of the variant IndraControl VAM 15.1/VAM 21.1 are de-
livered without a rear covering plate.
The following components are located on the rear side of the IndraControl
VAM 15.1/VAM 21.1:
●
25-pin plug to connect a hand-held terminal
●
6-pin plug to connect a handwheel
●
16 digital 24 V inputs
Bosch Rexroth AG
Device description
Machine Control Panels
32/53
DOK-SUPPL*-VAM*15*21*1-IT02-EN-P
