REXROTH IndraControl L25 CML...3N Series, Руководство по планированию проекта

Страница: 40 / 72

max. 100 m
1
8
2
1
3
4
5
6
7
8
Ethernet RJ45
Zum Netzwerk
Ethernet
L
S
To the Network
Fig.7-13: Ethernet interface
Bosch Rexroth recommends to use a STP cable of category 5.
According to the configuration in the application software, these connections
can be used for another TCP/IP network or for an RT Ethernet network.
The two plugs correspond to a twofold switch in a TCP/IP network.
LED Status
L (link) On: Link to network is available
Off: No connection to network is available
S (send) On: Data packets are sent
Off: No data is sent
7.3.3 PROFIBUS DP (only for Device Variant CML...PN...)
X7P PROFIBUS DP interface The IndraControl L25 provides a PROFIBUS interface according to DIN EN
50170, part 2.
D-Sub female connector, 9-pin
Type RS485
Cable type Shielded, twisted pair
Transmission rate 9.6 kBit/s to 12 kBit/ss
5
1
9 6
3
4
5
6
7
8
9
2
1
VP 100 mA
DGND
CNTR-T
RxD/TxD-P
CNTR-N
RxD/TxD-N
X7P
Shield above the metallic
plug of the housing
Fig.7-14: PROFIBUS DP interface
The bus line is specified as cable type A according to EN 50170, Part 8-2. The
bus line must comply with the following cable parameters:
Bosch Rexroth AG DOK-CONTRL-IC*L25*****-PR03-EN-P
Rexroth IndraControl L25
38/69
Connections and Interfaces