manualshive.com logo in svg

REXROTH HCS02.1 Series, Руководство по планированию проекта

Поделиться
Скачать
REXROTH HCS02.1 Series Скачать руководство пользователя страница 76

6-36

 Electrical Data

Rexroth IndraDrive C

DOK-INDRV*-HCS02.1****-PR02-EN-P

X13, Control Voltage (+24 V, 0 V)

The external 24V supply is applied via connection X13 for

•

  the power section of the drive controller

•

  brake control via X6 and

•

  the control section of the drive controller

With regard to control voltage supply, the HCS02.1 drive controllers are
available in two different designs.

•

 

Standard design HCS02.1E-W****-***N:

The control voltage is supplied by an external 24V power supply unit.

•

 

Optional design HCS02.1E-W****-***V:

The control voltage is supplied by an integrated 24V power supply unit.
A power supply unit that makes available the control voltage supply for the
power section and the control section from the DC bus is integrated in the
drive controller.

Note:

•

Technical data: see page 6-18

•

Falling short of the permissible control voltage leads to a

corresponding error message (=> refer also to firmware
function description).

•

Interruption to the control voltage when the motor is

running leads to torque-free (brakeless) runout in the motor.

Note on design -***V (see also page 6-18):

•

  The brake supply has to be realized via an external power supply unit.

•

  Applying the external supply voltage for the purpose of buffering at no-

power operation is allowed.

•

  Load at the terminal X13 is not allowed.

DANGER

Dangerous movement caused by brakeless
motor coasting to stop in the event of an
interruption to the control voltage supply!

⇒

 Do not stay within the motional range of the machine.

Possible measures to prevent personnel from
accidentally accessing the machine:
– protective fencing
– protective grid
– protective cover
– light barrier.

⇒

 Fencing and covers must be adequately secured

against the maximum possible force of movement.

Содержание HCS02.1 Series



































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды