Disposal 51/60
RE 91616-01-B/10.2014, A6VE Series 65 and 71,
Bosch Rexroth AG
12 Disposal
Careless disposal of the axial piston unit, the hydraulic fluid and the packaging
material could lead to pollution of the environment.
Observe the following points when disposing of the axial piston unit:
1.
Completely empty the axial piston unit.
2.
Dispose of the axial piston unit and packaging material in accordance with the
national regulations in your country.
3.
Dispose of the hydraulic fluid according to the national regulations in your
country. Also observe the applicable safety data sheet for the hydraulic fluid.
4.
Disassemble the axial piston unit into its individual parts and properly recycle
these parts.
5.
Separate according to, for instance:
– Cast parts
– Steel
– Aluminum
– Nonferrous metal
– Electronic waste
– Plastic
– Seals
13 Extension and conversion
Do not modify the axial piston unit or its fittings. This includes also the change of the
setting screws and the wiring.
The Bosch Rexroth warranty only applies to the delivered configuration. In case of
conversion or extension, the entitlement under warranty will be rendered void.
Certain setting screws are protected against unauthorized resetting by means of
protective caps. Removal of the protective caps will void the warranty. If you need
to change settings, contact your responsible Bosch Rexroth Service partner
(for address, see chapter 10.5 “Spare parts” on page 49).
