REXON RHP530, Руководство программиста по программному обеспечению

Страница: 6 / 11

3. Setting
There are many general parameters of RHP530 whereby user
can change parameter to obtain convenient operation.
Start programming software and click Setting –>General.
following dialog box appear
3.1. General Setting
3.1.1. Welcome Greetings
This option sets show defined characters after the RHP530 turns
on. To type word on field (up to 8–digit characters).
3.1.2. Power Save
This option enables power saving scale ( from 1:1/ 1:2 or 1:3).
3.1.3. Battery Low Warning
This option set battery low warning, when battery volt is below
6.5VDC, the option sounds warning tone in 30 seconds steps.
3.1.4. Tx Release Delay Time
This specifies the delay time after VOX.
3.1.5. Power ON LCD Timing Setting
This is period of time to show full patterns after power on.
3.1.6. PTT Rekey Inhibit Setting
If Tx time out timer expires, this option specifies the time,
RHP530 don’t allow to transmit during the time.
PROGRAMMING GUIDE V1.31
Page 4