Band knife machine R750/R1000 – Instruction manual
Page
54 / 89
FPUH Rexel s.c.
ul. Radziwoja 11, 61-057 Poznań
tel.: +48 61 87 68 946
www.rexelpoland.com
Pic.4 Cutting band tension adjustment mechanism
8.3.2.
Upper and lower band guide adjustment
Technical solutions used in this band knife machine R750/R1000 allow
adjusting upper and lower guide bearings to select desired cut accuracy.
Sometimes it is important to adjust guides after band replacement.
In order to perform adjustment of the upper band guide (pic.5):
•
Use 8 mm flat key to unlock the nuts (1) that hold bearing (2).
•
Use a slotted screwdriver and turn bearing axis (2) to set the correct
distance from the band (3).
•
Lock the axle nut (1).
•
A second bearing guide adjusted as described above; recommended
minimum gap of 0.75 mm (0.45 mm band thickness plus 0.3 mm gap).
•
Use a 4 mm Allen key to loosen the screw (4).
•
A wrench turning axis (5) to set the appropriate distance from the
band (3) recommended slot 0.5 mm.
•
Tighten the screw (4).
