8
change the TP, then press CH+/CH- button to Add/Delete/Edit TP.
3.
Motor
Mode: Press the VOL+/VOL- button to select motor mode(DiSEqC
1.2 or USALS) input.
4.
LNB Freq
: Press the VOL+/- button to change the LNB frequency.
5.
DiSEqC Type
: It used to set DiSEqC1.0 port ,press the VOL+/VOL- button
to select the required .
6.
DiSEqC 1.1
: Press the VOL+/VOL- button to select the required
DiSEqC1.1 input.
7.
Network search
:Press VOL+/VOL- button to select the Network search
Yes/No.
8.
22KHz
: It used to control the 22 KHz switch
9.
LNB Power
: Select the required LNB power.
4.2 USALS Setup
If you set the Motor Mode to
USALS
, you need set the longitude and the
latitude in
USALS Setup.
Setup by Country
: Press the
RED
button, you can choose the country, press
OK
button to select.
4.3 Factory Default
You can restore the product to the factory default and you can also setup it
according to the wizard.
Note: Please note that once you perform All, all data and settings will be
