READ BEFORE YOU BEGIN
• CLEAR A SPACE TO WORK ON
• STUDY THE ASSEMBLY DRAWINGS
BEFORE YOU BEGIN
• EACH PLASTIC PART IS IDENTIFIED BY A
PART NUMBER
• DO NOT OVER TIGHTEN SCREWS
• SEE NOTE ABOUT APPLYING STICKERS
IN STEP #16
CAUTION:
POSITION ALL PARTS IN THIS KIT
CAREFULLY. PARTS WILL ONLY SNAP
TOGETHER ONCE.
Á LIRE AVANT DE COMMENCER
• DÉGAGGEZ UN ESPACE POUR TRA-
VAILLER.
• ÉTUDIEZ LES ÉTAPES DE MONTAGE
AVANT DE COMMENCER.
• CHAQUE PIÉCE EN PLASTIQUE PORTE
UN NUMÉRO DE PIÉCE.
• NE SERREZ PAS TROP LES VIS.
• LISEZ LA RE MARQUE CONCERNANT
L´APPLICATION DES AUTO COLLANTS,
´A L´ÉTAPE 16.
MISE EN GARDE:
POSITIONNEZ AVEC PRÉCAUTION TOUTES
LES PIÉCES DE CE MODÉLE RÉDUIT, CAR
VOUS NE POUVEZLES EMBOîTER QU’UNE
SEULE FOIS.
'70 Chevelle
™
SS 454
The 1970 Chevrolet
®
Chevelle
™
SS
™
454 is one of the
most awesome muscle cars that ever prowled the streets.
The biggest, most powerful engine available was the
LS-6 454, which Chevrolet rated at a staggering 450 HP-
the highest horsepower rating of any muscle car. This
engine was capable of pushing the Chevelle to impres-
sive quarter mile times in the mid 13 second range at
around 110 mph. Some Chevelle SS 454s were equipped
with a special “cowl induction” hood with a vacuum oper-
ated flap at the rear of the hood that flipped up to draw
cool air in to the monster engine. Today, because of its
rarity and outrageous looks and performance, the 1970
Chevelle SS 454 is a highly valued collector car.
Your Revell
kit features easy snap and screw together
assembly, chrome plated parts, a factory stock or low-
ered ride height option, and colorful stick-on graphics.
If you have any questions or comments, call our hotline at:
(800) 833-3570
or, please write to:
Revell Inc Consumer Service Department, 1850 Howard Street Unit A,
Elk Grove Village, Illinois 60007
Be sure to include the plan number (85193210200), part number, description,
your return address and phone number.
Visit our website: www.revell.com
* APPLY STICKERS
*APPLIQUEZ LES AUTO-COLLANTS
* OPTIONAL PARTS
* PIECES EN OPTION
KIT 1932
85193210200
Step 16
ANY UNUSED PARTS MAY BE DISCARDED
Sticker Placement Guide
Parts Included
NOTE:
When applying stickers, avoid touching the “sticky” side to prevent finger prints on stickers. Bend sticker sheet slightly to lift edge of sticker & use a fingernail to lift
sticker from sheet. Line up sticker on body and press an edge into place, slowly working sticker with a fingernail until sticker is fully on model.
REMARQUE :
Pendant l’application des autocollants, éviter de toucher à la face collante pour ne pas laisser d’empreintes. Plier légèrement la feuille d’autocollants pour relever le
bord d’un autocollant, et le détacher de la feuille avec le bout d’un ongle. Aligner l’autocollant sur la carrosserie, appuyer pour coller un de ses bords, et continuer de
l’appliquer lentement du bout de l’ongle jusqu’à ce qu’il soit complètement collé sur le modèle réduit.
Step 13
5
9
8
3
6
7
2
10
10
4
Step 15
TIRE
★
A
CUSTOM WHEEL
CHROME
YOU MAY BUILD YOUR ‘70 CHEV-
ELLE WITH A STOCK OR LOW-
ERED RIDE HEIGHT. INSERT
THE METAL AXLES THROUGH
THE LOWER HOLES FOR A
STOCK RIDE HEIGHT OR
THROUGH THE UPPER HOLES
FOR A LOWERED RIDE HEIGHT
METAL AXLE
METAL AXLE
SCREWS
10
CHASSIS
17
14
11
13
A
A
A
A
12
18
19
20
* REPEAT SEVERAL TIMES
* A REPETER PLUSIEURS FOIS
* REMOVE AND THROW AWAY
* A RETIRER ET JETER
LOWERED
STOCK
1
TIRES
SCREWS
AXLES
8
STICKER #7 MAY BE CUT FROM
STICKER SHEET WITH BACKING
AND ATTACHED TO FRONT BUM-
PER USING WHITE GLUE
OPTIONAL
2
4
5
6
1
OPTIONAL DECALS
3
Revell Inc Elk Grove Village, IL. Copyright © 2009. All rights reserved.
Step 14