4 ”
103mm
1”
27mm
1 ”
33mm
”
13mm
”
13mm
FreeDim RGB/CCT Wall Controllers
(AARAS) < upd 1020m
Front views
Housing
Side views
R
G
B
2
61mm
1”
27mm
W
C
READ ALL INSTRUCTIONS BEFORE INSTALLING SYSTEM.
Before beginning installation, be sure power is turned OFF to light system.
Tresco
®
FREEDiM Wall Controllers provide color control for RGB lighting or warm/
cool controls for CCT (white color-tunable) lighting on Tresco
®
low voltage LED RGB
and CCT lights. They also control the intensity (dim levels) of the lights. The digital
screen on the FREEDiM Parent Controller displays the current mode and settings
.
The wireless Wall Controller must be positioned within 50 ft. (15m) of the Parent
Controller. Note: outside interference may affect the signal between Wall Controller
and Parent Controller or Child Receiver. (
see ‘Signal Interference’ on page 2
)
The Wall Controller's mounting cradle
(see Figure 1)
allows installation directly to
drywall or to a standard wall electrical box, giving the appearance of a hardwired
wall switch. Verify power to outlet box is off before installing.
(see Figure 2 for
installation options)
The Wall Controller has a magnet to hold it within the mounting cradle or to place
on any magnetic surface (i.e. refrigerator door). To remove Wall Controller from
mounting cradle use the slight indents on the top and bottom edges of Controller.
The mounting cradle has an index tab to orient the Wall Controller in the proper
"up" position. (
see Figure 1
)
Tresco’s FREEDiM Parent Controllers and Child Receivers can be used with any
Class 2, 12VDC/60W or 24VDC/96W Power Supply. As an option, Tresco
®
Power
Supplies are available:
(see Power Supplies on Figure 3 & 4)
12VDC/60W max. part no.: L-DC-SLELT60-1, and
24VDC/96W max. part no.: L-24DCELT96-1
For more Power Supply options, see Tresco
®
Specifications Catalog.
Installing Parent Controller:
NOTE: All wiring must follow local codes and NEC regulations.
1. Verify power is turned off to light system. Connect Parent Controller input wire
to 12VDC or 24VDC Power Supply output wire
(see Figures 3 & 4)
.
2. If using Tresco Power Supplies, connect Parent Controller input wire to 12VDC
Mounting Block or 24VDC 5-Output Barrel Splice
(see Figures 3 & 4)
. Otherwise
follow installation guide of power supply used.
To use multiple Parent Controllers or Child Receivers on one Power Supply, the
optional 12VDC Mounting Block (P/N: L-TRANS-MNT-BL) can accept 6 Parent
Controllers and/or Child Receivers. The optional 24VDC 5-Output Barrel Splice
(P/N: L-1BRL5-1) can accept 5 Parent Controllers and/or Child Receivers.
Use insulated staples or plastic ties to secure ALL loose cords.
3. With RGB or CCT light(s) connected to a starter cord, plug the starter cord into the
Parent Controller or Child Receiver(s) 4-Position Amp Output Connector.
Child Receivers must be used with Parent Controller.
To connect multiple RGB or CCT light(s) to a single Parent Controller or Child
Receiver use the optional 4-Position 6-Output Adaptor Cord (P/N: L-4P6O-1).
Plug the input wire of the Adaptor Cord to the 4-Position Amp Connector on the
output of the Parent Controller or Child Receiver. Then plug the desired RGB or
CCT light(s) starter cords into any of the 6 outputs of the Adaptor Cord.
The 4-Position 6-Output Adaptor Cord works with 12VDC/5A and 24VDC/4A
systems as well as RGB and Color Tunable White Lights.
4. Check all connections and turn on power to the Power Supply.
5. Check the mode on the Parent Controller and select either RGB or CCT mode
depending on the LED light system installed.
NOTE: See separate instruction sheets for further information on Tresco
®
low voltage LED RGB and CCT lights, FREEDiM Parent Controllers and Child
Receivers, and Tresco
®
Power Supplies.
See page 2 for further instructions.
Accessories
(sold separately): Extension and Link Cords, additional Parent
Controllers, Child Receivers, Wall Controllers, 12V Mounting Blocks, 24V 5-Output
Barrel Splices, 4-Position 6-Output Adaptor Cords.
Options to Install Mounting Cradle in a Wall
Option 1:
Option 2:
Option 3:
Non-Metallic Low-Voltage Bracket
Single Outlet Box
Multiple Outlet Box
(e.g. Carlon
®
Model #SC100R)
Installation Instructions
FREEDiM Wireless RGB & CCT Wall Controllers
Single Zone • 12VDC 60W & 24VDC 96W
RGB Wall
Controller
Mounting
Cradle
Front views
Side views
Index Tab
to orient
Controller
FreeDim Wall Controller
(AARAS) < upd 1020 m
FreeDim Wall Controller
(AARAS) < upd 1020 m
Cover with a
Decora
®
style
wall plate
#1
CCT Wall
Controller
#2
System Parts:
(1) Wall Controller - RGB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P/N: L-WLD-RGB-WH-1
(1) Wall Controller - Color Tunable White . . . . . . . . . . . . . . . P/N: L-WLD-CCT-WH-1
(1) Dynamic Parent Controller (12/24VDC) (required) . . . . . . . . P/N: L-RGBCCT1-PREC
(1) Dynamic RF LED Child Receiver (12/24VDC) (optional) . . . . P/N: L-RGBCCT1-CREC
(1) Power Supply, Class 2, 12VDC 60W max (or) 24VDC 96W max
Tresco
®
low voltage 12VDC or 24VDC LED RGB or CCT light(s) with Starter Cord
Also see Accessories below.
Wall Controller Specifications:
Operating Voltage: . . . . (1) CR1620 battery
(included)
Radio Frequency: . . . . . 916.5 MHz
RF Remote Distance: . . 50 ft. (15m)
Parent Controller & Child Receiver
Specifications:
Input Voltage: . . . 12VDC or 24VDC
Output:
. . . . . . . 12VDC (5A, 60W), or
24VDC (4A, 96W)
Orig IN IN PDF from RAS 116 called “I-WLDIM1RND” WATCH! old lines have “double-lines” w layers. See Hidden Layer for orig IL. >
GRX flip & rework middle IL only on 1217 MP ... But since converted to G5 !!! 218 (u.519, 619)
RF LED Receiver
RF LED Controller
OUTPUT 12 VDC
Typical 24V Installation
Showing example of RGB 4-Wire installation
with optional Tresco products
Orig IN IN PDF from RAS 116 called “I-WLDIM1RND” WATCH! old lines have “double-lines” w layers. See Hidden Layer for orig IL. >
GRX flip & rework middle IL only on 1217 MP ... But since converted to G5 !!! 218 (u.519, 619)
LED Power Supply
12 VDC
Install Wall Dimmer on
input (line voltage) side
of Power Supply
INPUT
OUTPUT 12 VDC
RF LED Receiver
RF LED Controller
12V Mounting Block
(optional)
Length w/wire 9-5/16” (236 mm)
Input Cord
6” (152 mm)
Typical 12V Installation
Showing example of CCT 3-Wire installation
with optional Tresco products
#
4
#
3
Power Supply
12 VDC 60W
Parent
Controller
CCT Starter Cord
(3-wires)
Learning
Key
Tresco
®
12V LED lights
(example using CCT FlexTape)
24V 5-Output Barrel Splice
(optional)
Length w/wires 13” (330 mm)
Power Supply
24 VDC 96W
Parent
Controller
Input Cord
6” (152 mm)
Tresco
®
24V LED lights
(example using RGB FlexTape)
Barrel-to-AMP
Adaptor Cord
(optional)
3” (76mm)
Child Receiver
(optional)
CCT Adaptor Cord
(3-wires) (2” 50mm)
CCT Tape
Connector
4-Position
6-Output
Adaptor Cord
(optional)
4-Position AMP
Connectors
Child Receiver
(optional)
RGB Starter Cord
(4-wires)
RGB Adaptor Cord
(4-wires) (2” 50mm)
RGB Tape
Connector
4-Position AMP
Connectors
Learning
Key
4-Position
6-Output
Adaptor Cord
(optional)
