Rev-A-Shelf ML-450SC-WS-1 Скачать руководство пользователя страница 1

This is a spring loaded 

product that can cause 

severe harm if not handled 

properly during installation. 

WARNING

TOOLS REQUIRED:

30–45 MIN

ESTIMATED ASSEMBLY TIME:

CARE AND MAINTENANCE:

•   Clean with a damp cloth and 

wipe parts dry

•   Lubricate pivot points as 

needed

 HEAVY DUTY APPLIANCE LIFT

10  

mm

#2

3  

mm

A.

B.

C.

LEFT & RIGHT

Parts List

No.

Description

Qty

A

10 g x 16 mm Wood Screws

16

B

10 g x 13 mm Wood Screws

12

C

Side-Mounting Brackets (L & R)

2

D

Shelf

1

INSTALLATION INSTRUCTIONS:

 HEAVY DUTY APPLIANCE LIFT

I-MLWHSHELF-0118

D.

Содержание ML-450SC-WS-1

Страница 1: ...IME CARE AND MAINTENANCE Clean with a damp cloth and wipe parts dry Lubricate pivot points as needed HEAVY DUTY APPLIANCE LIFT 10 mm 2 3 mm A B C LEFT RIGHT Parts List No Description Qty A 10 g x 16 mm Wood Screws 16 B 10 g x 13 mm Wood Screws 12 C Side Mounting Brackets L R 2 D Shelf 1 INSTALLATION INSTRUCTIONS HEAVY DUTY APPLIANCE LIFT I MLWHSHELF 0118 D ...

Страница 2: ...NTER TOP 2 2 3 mm 3 mm STEP 2 MOUNTING THE APPLIANCE LIFT SHELF NOTE Holes are pre drilled to ensure proper function of the appliance lift From underneath the shelf line up the pre drilled holes in the shelf with the slotted holes on the mounting plates Insert 6 10 g x 13 mm wood screws into the pre drilled holes but do not fully tighten See Fig B 12400 Earl Jones Way Louisville KY 40299 rev a she...

Страница 3: ...g C Note Shelf cannot extend past the outer surface of the mounting plate FIGURE D STEP 3 STEP 5 LOOSEN SCREW ADJUST VERTICALLY INSTALLATION INSTRUCTIONS SHELF MOUNTING WORKSHEET I MLSH he slotted holes on the mounting plates Insert 6 10 x 1 2 wood crews into the pre drilled holes but do not fully tighten See Fig A Adjust shelf side edges so they are over the 90 degree bend of the mounting plate a...

Страница 4: ...holding tension until after the set bolt is in the desired location With the bolt removed adjust to the desired setting Reinstall the set bolt and tighten securely Repeat with the opposite side mounting bracket STEP 6 ADJUSTING APPLIANCE LIFT SPRING TENSION REFER TO FIGURES E F FIGURE E 1 0 9 kg 2 9 13 kg 3 13 27 kg RECOMMENDED SPRING POSITION FOR VARYING MIXER WEIGHT Anything over 27 kg will void...

Отзывы: