SuperCleanox Operating instructions
Page
56
of 62
20 Maintenance
Note
The following maintenance work may be performed by the user of this
appliance:
All cleaning work on the appliance housing.
All cleaning work on the accessories.
Replacement of wear parts
Felts, Teflon handles, carbon electrodes, earth clamps, earth
cables, marking accessories
Safety information
The following maintenance work must be carried out by a qualified electrician:
Replacing defective mains plug.
Replacing defective mains cable.
Replacing the earth and marking jacks on the appliance.
Replacing or repairing any components located inside the appliance
housing.
20.1 Inspection and maintenance schedule
Maintenance of the appliance consists of thorough cleaning and
inspection by a qualified electrician. The frequency depends on the
degree of contamination.
Observe the proposed maintenance intervals.
Before starting, the appliance must be disconnected from the mains
(unplug).
Dust deposits must be removed with a vacuum cleaner. Wipe the
components with a dry cloth.
Use only degreasing agents that are suitable for electrical equipment.
Observe the instructions on cleaning the appliance and accessories.
Table 11 Inspection and maintenance schedule
before start = before every start, d = daily, weekly. = w, monthly = month, quarterly = every 3 months, half-yearly = every 6 months, annually =
every 12 months
Work to be done
before
start
d
w
m
quarterly
half-
yearly
annually
Safety check as described in section 2.3 and below
X
X
Check marking felt for wear and replace if
necessary
X
X
Check marking felt for contamination and replace if
necessary
X
X
Check template for contamination and replace if
necessary
X
X
Clean marking handle
X
X
Check carbon electrodes for contamination and
wear, clean or replace if necessary
X
Clean earth clamps
X
Check earth clamps for oxidation, clean if
necessary
X
Check electrolyte, if used up--> replace
X
X
Clean power unit
X
Maintenance of the appliance
X
Repeat tests in accordance with DGUV 3
X
