SuperCleanox Operating instructions
Page
12
of 62
2.3.2 Before starting work, check
All current-carrying cables and wires for damage to the insulation.
All electrified wires and cables for breaks and kinking of the strands inside
the insulation.
All plugs and connectors for damage such as loose solder joints.
All switches for damage, e.g. chipped housing parts.
The workpiece clamp for any external damage.
Whether all Teflon insulations are present and undamaged.
Please make sure that you do not pull or route any electrical cables
across sharp edges.
Your workplace must be freely accessible
Make sure there are no tripping hazards.
2.4 Potential misuses
The connection to an incorrect mains voltage can lead to the destruction
of the "SuperCleanox".
The connection of external components that are not approved by Reuter
GmbH, can:
lead to the destruction of the "SuperCleanox",
put people at risk.
The use of chemicals that are not approved by Reuter GmbH, can:
lead to health problems,
adversely affect the work results.
Use of unsuitable electrolytes for a particular application.
Example: The use of cleaning electrolytes for marking/ labelling
can result in staining or illegible marking / labelling.
Carryover of marking electrolyte into the cleaning electrolyte
causes dull places or blacking on the workpiece surface.
2.5 Residual risks
Potential risk
Effect
Remedy
Electrolytes get into the hands of
children or people who are
inexperienced in dealing with
chemicals
Depending on misuse
- Skin burns
- Burns on clothing
- Burns on other objects
- Severe internal injuries if the
chemicals are swallowed
Store electrolytes and other
chemicals so that they are only
accessible to authorized
persons.
Appliance is used by
unauthorized persons
(curiosity, play)
- Burning of skin if the
electrode or the
workpiece gets too hot
- Inhalation of fumes with
corresponding
health damage
Ensure that the appliance can
only be operated by authorized
persons.
Secure the appliance after use
to prevent improper use.
Table 1 Residual risks
!
!
