6
check
Recommended Signal Receiver distance
about distance between receiver and
projection area.
3). Connect one end of Mini USB cable to Mini USB Port on Signal Receiver, the other
flat end to PC.
4). Adjust the position of receiver and the angle of Receiving Front to assure it can
receive signal from the whole projection area. (
Hardware Calibration Program in the
driver can help you adjust the angle of Receiving Front.)
6.2 Ceiling Mounting
In case the position of the projector and receiver is not changed frequently, you could
use velcro to fix the receiver on the short-throw projector.
1). Fix Signal Receiver with stand by clamp on it.
2). Stick one side of velcro on the base of stand, and the other side on projector.
3). Press velcro on the stand with the one on the projector tightly.
4). Connect one end of Mini USB cable to Mini USB Port on the Signal Receiver, the
other flat end to PC.
5). Adjust the position of receiver and the angle of Receiving Front to assure it can
receive signal from the whole projection area. (
Hardware Calibration Program
in the
driver can help you adjust the angle of Receiving Front.)
