5
4.5 How to Install Projector
IQBoard LT Series can work with whiteboard, projector and computer, or work with
computer and LCD TV, as the figure as follow. In case you want to use projector, open
the projector after connection, and adjust it to make its projection image within the
projection area and centered. Then use the trapezoid rectification function of the
projector to make the projection image quadrate.
Chapter 5 Install and Uninstall Drivers
5.1 Install Drivers
Run
“IQBoard LT Series Universal Drivers V8.0”
in the installation CD, and install the
drivers according to the prompt. The computer will automatically find a new hardware
and install the drivers.
5.2 Uninstall Drivers
Select
“Start > Programs > IQBoard LT Series Universal Drivers V8.0 > Uninstall”
to
uninstall. You can also open Control Panel, select
“Add/Remove Programs”
, and in
the list of currently installed Programs, select
“IQBoard LT Series Universal Drivers
V8.0
”
, then press the
“Remove”
button to remove the drivers.
Chapter 6 Mount Signal Receiver
6.1 Desktop Mounting
For mobile use of IQBoard LT Series, you can simply mount Signal Receiver on the
desktop.
1). Fix Signal Receiver with stand by clamp on it.
2). Place Signal Receiver on or next to the short-throw projector. Receiving Front
should be faced to projection area. If your projector is not a short-throw one, please
USB Standard-A Plug for connecting
computer
Mini USB port for connecting Signal
Receiver
