4
USB charging port:
Re-charge battery in Light Pen
by connecting pen with computer
through USB cable.
4.3 Signal Receiver
Signal Receiver can receive infrared signal emitted by Electronic Wand or Light Pen,
thus determine its position, and sent the information to PC through the cable
.
Receiving Front:
Receive infrared signal emitted by Electronic Wand or Light Pen.
The effectvie distance between Receving Front and screen is 0.8-2.05m.
Power Indicator:
When connecting Signal Receiver with computer through USB
Cable sucessfully, this indicator will turn red.
Mini USB Port:
Connect Signal Receiver to computer with USB Cable.
4.4 How to Connect Signal Receiver with PC:
1. Connect Standard-A Plug to a free USB port on PC.
2. Connect Mini USB to Mini USB Port on Signal Receiver.
3. Connect VGA cable from projector to VGA port on PC.
Note:
1. Please do re-charge Light Pen with a battery which is re-chargeable in, or it may cause
explosion of battery if you re-charge Light Pen with a disposable battery in.
2. Please don't charge Light Pen over 7 hours!
3. Please don't use Light Pen while charging!
Receiving Front
Power Indicator
Mini USB Port
