3
Chapter 3 Model Introduction
IQBoard LT M1:
Single Mode, only allow one user to operate with one Light Pen.
IQBoard LT M2:
Support Dual Mode, two users (two light pens) can operate
simultaneously on the interactive screen.
Chapter 4 How to Install Hardware
4.1 How to Install Electronic Wand
Step 1. Unscrew the battery cap by turning it counterclockwise.
Step 2. Insert 3A AA batteries with the plus (+) side up.
Step 3. Screw the battery cap back by turning it clockwise
Step 4. Screw the retractable body clockwise into the holder.
4.2 How to Install Light Pen
Replace pen tip:
When pen tip is worn out, please unscrew the pen tip by turning it
counterclockwise and replace the pen tip, then screw the pen tip back by turning it
clockwise.
Replace battery:
When battery is used out, please gently lift the battery cover to
open it and insert a new battery with the plus (+) side up, then close the batter cover.
Note:
1. You can press the interactive button on the holder to achieve single click, double click and
right click functions.
2. .Please do not bend Electronic Wand since it has precise electronic components inside.
USB Charging Port
Pen Tip
Front Button
Back Button
Battery Cover
