8
Chapter 7 How to Start and Orient IQBoard LT
7.1 Hardware Calibration
You need to do hardware calibration at the first time you use IQBoard LT Series to
assure Signal Receiver is set on the correct positioin. Y
ou don’t need to re-orient
under the same environment.
To do hardware calibration:
1). Select
“Start > Programs > IQBoard LT Series Universal Drivers > Hardware
Calibration
”.
2). Ajust position and angle of Signal Receiver to assure the whole projection area is
inside the red frame. (see figure as follow)
Brightness :
brightness of the screen is adjustable as above figure.
Image Upside Down:
For Ceiling Mounting, the image projected on the screen is
upside down, you can click “Image Upside Down” Button to flip the image.
3). Fix Signal Receiver, then you can start orientation next.
7.2 Orientation
In order to make IQBoard LT Series work normally, you need to orient at the first time
