Operating the device
27
6.3 Preparing the division process
6.3.1 Inserting the divider module
NOTICE
N13.0066
Wear or damage to the machine
Operation without a divider module and overloading
−
Operating the machine without a divider module may lead to increased
wear or damage to the machine.
•
Always operate the machine with a divider module.
•
Do not overload the machine. Check the amount of material in the
segments of the divider module regularly while the machine is
running.
Fig. 12:
Continuous divider module with one segment
Fig. 13:
Batch divider module with eight segments
•
Place the desired divider module (K) into the dividing area.
•
Fit the relevant number of segments (L) in the divider module (K) according to the desired
number of divisions of the material.
K
K
L
Содержание PT 300
