Retsch GM 200, Руководство пользователя

Страница: 33 / 60

Controlling the Device
33
7.2 Operating Modes and Navigation
The device can be operated entirely using the touchscreen. The operating software can be
divided into three operating modes:

Manual

Programme

Sequence
7.2.1 Navigation between Operating Modes

Enter the desired grinding parameters in the control panel area of the settings ( B2 ) to
perform a manual grinding.

Press the button ( B1.1 ) to enter the programme settings.

Press the button ( B1.2 ) to enter the sequence settings.
7.3 Grinding Parameters
The grinding parameters can be set or changed via the control panel. It can be distinguished
between adjustable parameters and parameters that can be activated or deactivated.
7.3.1 Adjustable Parameters
The following parameters can be set via data entry:

Process time

Speed
In manual mode the parameters can be edited directly. In programme mode the parameters can
only be changed, when the edit mode has been activated via the button ( B3.4 ).

Press on the parameter to be edited. The background is highlighted in grey and the border of
the rotary knob ( B4 ) lights up blue.

Turn the rotary knob until the desired value is displayed.
The set value is applied as soon as the parameter is pressed again, or another parameter is
selected.