Retsch DustMon RD 100, Руководство пользователя

Страница: 36 / 59

DustMon RD 100 using PC control unit / software installation
36
Explanation
1 File name
Consisting of: File name
– Sample ID – Date – Time
File ending: dur; dur-files can only be opened using the DustMon RD 100 software.
2 Key
Assignment of the colour to the curve(s) shown.
3 Sample ID
Description/comment on the sample.
4 User ID
Details of the operator (or department, company etc.).
5 Date
Date of the measurement.
6 Time
Time of the measurement.
7 Method
WL = White light (LED).
8 Dust Index
Ma value after 30 seconds.
9 Dust area
Integral beneath the graph.
10
Max value
Maximum value measured during the measurement.
11 End value
Dust value after 30 seconds (basic setting).
12 Factor
Specification of the factor by which the measurement has been adjusted. 1 is shown if
no adjustment has been made.
13 Value 1 to 10
To be individually set (see the "System settings before the first measurement ") chapter.
If selected, the values (dust value after x seconds) are specified.

All details can be sorted by clicking on the column heading (14)!
Fig. 27: Display of the results

Information about the measurement results can be adjusted, i.e. data and values that you do
not need can be faded out. Refer also to the "System settings before the first measurement"
chapter.
8.5 Loading the results
If you have saved results in different folders, ensure that you have selected the correct folder.
Results can also be merged if you have saved them in different folders.
To retrieve a result, click Load
(1) . A dialog box (2) opens. The measurement files (always with the
"dur" file ending) are listed here. If necessary a different folder can also be selected from here. Mark
the desired file, click the "Open" button and the measurement result will be displayed.
9