Packaging, Transport and Installation
19
9 Power version
10 Mains frequency
11 Capacity
12 Amperage
13 Number of fuses
14 Fuse type and fuse strength
In the case of queries please provide the device designation (
1
) or part number (
3
), as well
as the serial number (
4
) of the device.
4.7 Removing the Transportation Lock
WARNING
W3.0005
Risk of injury due to the device falling down
Lifting the device above head height
−
The device can fall causing serious injuries when lifted above head
height.
•
Never lift the device above head height!
Fig. 2:
Unscrewing the transportation lock
Unscrew the screws on either side of the device (
TS
).
Grasp the device by the lower lateral housing and lift the AS 400 control to its intended
location. Be careful not to lift the device by the plastic front panel as it is not designed for the
weight.
CAUTION
The weight without sieve stack and sieve clamping unit amounts approx. 70 kg.
The device may only be lifted by three people.
The two transportation plates (
TP
) do not necessarily have to be removed. They can be used
to individually mount the AS 400 control, i.e. to firmly screw the device to the laboratory
bench, if necessary.
TS
TP
Содержание AS 400 control
Страница 2: ...2 Copyright Copyright by Retsch GmbH Retsch Allee 1 5 42781 Haan Germany...
Страница 5: ...Notes on the manual 5...
Страница 49: ......
Страница 50: ...Copyright Copyright by Retsch GmbH Retsch Allee 1 5 42781 Haan Germany...
